We've set up a list and we've taken detailed images of every part and accessory included with Jabba's Sail Barge for future reference. This might come in handy for you if you are going to buy a used Sail Barge in the future, or if you are going to sell yours in the future and want to make sure that you still have all the parts. It will also be helpful to look at when you disassemble your Sail Barge for storage.
All the accessories were included in a box which was stored underneath the Sail Barge.
There were four feet included, they can be removed from the Sail Barge.
There were two fins included.
There were 3 antennas included (the 2 small ones go on the side of the Sail Barge (one on each side), the big one goes on the bottom of the Sail Barge underneath the cockpit). Both shackles get attached to the prison wall and the 3 small engine details pug into the bottom of the Sail Barge in the back.
There were 3 cannons included (2 rail cannons, 1 main deck cannon). They are all removable.
There were 2 fabric sails included, 2 support structures, 4 V-shaped support structures, 4 braces and 2 horizontal beams.
There were 2 of these support structures included:
There were four of these V-shaped support structures included. The pegs on the bottom are different sizes, make sure these go into the exact sized hole.
There were four identical braces included:
There were two identical horizontal support beams included:
Parts and accessories which were not inside the box included the 5 removable side panels on the outside of the Sail Barge, the removable floor panel for the smuggler's hatch and the railing which when removed allows R2-D2 and C-3PO to jump off the Sail Barge.